YOUR #1 SOURCE FOR TOYOTA PERFORMANCE PARTS!!
8 bolt, 9 bolt & 11 bolt Water Plate pattern available
Sometimes a non-properly working emissions control system can rob power and cause running problems to your 22R engine. There is no need to replace it when your vehicle is for off-road use only. So LCE decided to design and fabricate a kit that comes with all the components and hardware needed to get rid of that emissions control system once and for all. This kit also contains the block plates needed to block off the water lines from the back of the timing cover, as well as the center of the head, and under the intake manifold for those of you that are going to block off the heater core and / or some of the water lines on your engine.
4 Port & 8 port versions available for both 2RZ & 3RZ.
LCE Superchargers are belt-driven from the crank, delivering more torque and Horsepower from idle to red line. LCE Superchargers deliver the extra torque you need for towing, passing and carrying heavy loads. Because they pack more air into every cylinder stroke, they are especially effective at higher altitudes.
LCE is now offering ReadyLIFT products for newer Tundras, Tacomas, 4Runners and FJ Cruiser. ReadyLift offers leveling kits, lift kits and suspension kits.
These distributors are Brand New units that have been customized with with custom springs and weights to achieve maximum performance. We re-curve these distributors to advance much quicker than stock to provide excellent throttle response and quick acceleration.
The base of the motor mount (frame side) is made out of 1/4 inch plate, while the surface plate that the motor sits on is made out of 3/8 inch material and has a class 10.9 bolt that is mechanically locked to the engine mount plate, not just threaded in. The bushings are made out of a high grade polyurethane for durability and years of dependability. The finish is a silver zinc plating that looks sharp and will last a lifetime. The mount holes are slotted so that the Bomb Proof Motor Mount Kit is easy to install and can be used on 3.5 inch and 3.75 inch applications. You don’t even have to measure to figure out what motor you have; the Bomb Proof Motor Mount Kit just works.
Check all our discounted Trail-Gear's parts for HUGE savings.
We work hard putting our instructions together for our products. Many of the instructions are online for our parts that we make. We also have many different manufactures instructions on the web as well. If there is a set of instructions you need call our sales desk and we will see what we can do about getting them loaded on the web or e-mailed to you. LC Engineering wants all of its customers to have an easy successful install no matter what the part.
VISIT OUR TECH SECTION ON LCEperformance.com OR CLICK HERE!
Also notice that we added a couple of features to help you get more and easier information by adding some extra buttons on almost every part on our webstore
We want to hear your opinion! firstname.lastname@example.org
This is Wasim's 1994 Hilux, he and his buddies recently swapped the engine for a 3.0 Turbo Diesel D-4D, some other modifications are: 3" OME lift kit, Toyota rear E-locker, Front Limited slip differential and 33x12.5x15 tires.
It took them 3 months to do the wiring and break the immobilizer system ( if you didn't know, D-4D's have one of the most sophisticated immobilizer system on the market)
Here is a video of Wasim's Hilux first start after swapping the 3.0 D-4D (Turbo Diesel)
Do you have a Toyota you feel proud of? Did you just finished building yours or are in the process of doing it? Don't be shy, our readers would love to see it. Send us some good pictures along with a basic write up about what you have done to it.
KEEP SENDING YOUR PICTURES TO MARKETING@LCENGINEERING.COM
Do you want your Toyota featured in our Facebook page's cover photo or our newsletter?? Send us some nice photos of your vehicles.
LC Engineering 2031 Holly Avenue Lake Havasu City AZ 86403
Sales 877-505-2501 Tech 928-855-6341