This Billet air Filter will provide years of use with proper care. Follow the K&N Cleaning instructions closely. Do not use compressed air to clean or dry the element.

Instructions: For a dust proof seal, apply a small amount of grease,between the filter base housing and carburetor. Install air filter using the hardware kit provided. Do not over tighten!

Hardware:
4   5mm x 20 Hex Bolts
4   6 mm x 20 Allen Bolts
4   5mm Lock Washer
4   6mm Flat Washers
2   6mm x 3" All Thread
2   6mm Nylock Nuts
2   Plastic Washers

Call our Tech Line if you have any questions on installation. 928-505-2501