LC Pro Rod Bolts are the strongest most reliable replacement bolts available. Use these bolts whenever rebuilding your rods.

Installation Tips:

• Make sure there is adequate chamfer in connecting rod to clear radius under the head of the bolt. Press the bolts into the connecting rods.
• Rods should always be re-sized when new bolts are installed.
• Use a Moly assembly lubricant to lubricate the threads of the bolt and nut surface.
• LC recommends using the stretch method for torquing bolts. Follow the instruction for using a stretch gauge. Stretch bolts to .0060 - .0067.
• If you do not have a stretch gauge, follow these steps using a Moly assembly lube. After rods are installed into the motor, torque bolts to 50ft Lbs.. Loosen the nuts. Torque to 50ft Lbs. again. Loosen the nuts and torque to 50 ft Lbs. A third and final time.
• A log should be kept on the original non-torqued length of each bolt.